Informationen zu Lieferzeiten – hier ansehen

Stahlbürsten-Set 3-teilig Artikelnummer: 4745T

1,39 €
Kohlenstoffstahldrahtbürsten. 6mm Durchmesser. Schaft für Einsatz in Bohrmaschine vorhanden. Zur schnellen Rostentfernung.
-
Technische Daten
-
Zusätzliche Information
Artikelbezeichnung
4745T
Lieferumfang
50 mm Topfbürste, 50 mm Rundbürste und 25 mm Pinselbürste

Special Price 1,39 €

Statt 2,99 €

Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

Sie sparen 1,60 € (53%)


oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
Stahlbürsten-Set 3-teilig wurde bewertet mit 4.5 von 5 von 147.
Rated 5 von 5 von aus Excellent cooking utensil ! A week ago a cherished stainless steel pan was filled with rhubarb and the process of making a superb rhubarb crumble began. 5 hours later the smell of something burning strongly raised alarms and the pan was discovered having changed appearance from a bright silver to encrusted black, with 3 dimensional lumps of carbonated rhubarb welded to the interior of this ad hoc sculpture. 4 days of soaking with oven cleaner et al, failed to have any effect. As a last resort I bought a set of these brushes and lo and behold, a 100% clean and restored pan ! Have to say these brushes did a fantastic job, and so, I only have another 5 pans to do. Worth every penny
Veröffentlichungsdatum: 2016-06-02
Rated 5 von 5 von aus Great piece of kit to have Every couple of years I do the boring job of wire brushing my metal garden gates to repaint, its takes hours to scrub with a wire brush and takes its toll on the arms. anyhow's down to the product, I saw these while looking online and thought I would give them a shot for the price I was not expecting anything to be honest, but how wrong I was what usually takes be hours took me round about 30 minutes and the gate was prepared and ready to paint. The wire drill bit held up well did not ware down at all and I was putting some pressure on them. For the price these are a must for anyone doing similar jobs, I will be ordering more to keep on hand, and would definitely recommend to anyone.
Veröffentlichungsdatum: 2014-06-16
Rated 5 von 5 von aus Don't look anywhere else After buying countless cheaper wire brushes that only last for a short time I thought I would try this carbon steel set. They have performed far better than any other wire brush I have owned previously, and even after many full days of heavy use they still work well. I have removed rust from chrome wheels without damaging the chrome, as well as removing enamel paint from vintage motorbike frames with ease. Only wish I hadn't been so tight and bought cheaper ones in the past, although a couple of cheap brushes cost more than this set and only last a fraction of the time.
Veröffentlichungsdatum: 2018-07-10
Rated 5 von 5 von aus Drill carbon steel wire brush Great rotary wire brushes. Used to prepare the underside of my classic car. GOOD SIZES WHICH ENEBLE ACCESS TO EVERY NOOK AND CRANNY. Screwfix have put this selection of sizes which is perfect for the type of job I undertook. Plenty of working life left in them too after the full prep of the underside of my Morris Minor. One tip is to use them with a drill that has forward and reverse action thus keeping them keen and even wear, although they have not worn very much at all. In conclusion a top quality product perfect for metal preparation
Veröffentlichungsdatum: 2012-12-23
Rated 5 von 5 von aus Perfect for brickwork Went back to the brick in the attic and needed something to clean plaster off the bricks. These were recommended and didn't disappoint. Smaller than they look but so much more effective than a wire brush. No damage to brickwork. Attic looks amazing now
Veröffentlichungsdatum: 2016-08-03
Rated 2 von 5 von aus Horses for courses. I've used similar brushes before and I had similar expectations of this set. I was disappointed with the size of the brushes firstly but I guess you get what you pay for. I've been using them in a 240v drill on bike frame's powder coating. I've stripped a few frames using this kind of brush set but previously with a cordless drill and what has normally taken a couple of hours with the help of Nitromors, has taken 8 with a 240v drill and Nitromors! The bristles steadily came off so I'm at the stage of needing a new brush. Like I said earlier, you get what you pay for and I imagine that on wood and normal paints, the brushes would fair much better.
Veröffentlichungsdatum: 2015-10-11
Rated 4 von 5 von aus Great Value for Money I bought these for doing a bit of cleaning up to an old motorbike I'm restoring. I've never used wire brushes like this before but I have been very surprised by how well it performs. Firstly the 3 brushes are differing sizes making it great for a variety of mass and detailing tasks. I was a bit apprehensive about the bristles coming out, but I haven't lost any and I've done a fair amount with them.The only thing which I would like to see would be some sort of extension for it to assist in getting to hard to reach places with a clumpy power drill. I'd anticipate these will last for a a fair length of time. A good add on to my tool box!
Veröffentlichungsdatum: 2015-01-01
Rated 5 von 5 von aus Great for pallet upcycling I use these drill bits with my corded hammer drill to churn out the softwood in the furrows between the woodgrain of pallet wood planks. It works a treat at giving more texture and highlighting the grain which remains pronounced. I've used it in building both a bar and cladding my hallway. Slightly unconventional use of this wire brush set but beats doing it by hand. Excellent, quality product that lasts a long time as well.
Veröffentlichungsdatum: 2018-12-10
  • y_2019, m_5, d_23, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_147
  • loc_de_DE, sid_4745T, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de