Informationen zu Lieferzeiten – hier ansehen

Scheppach Tischkreissäge 1.200 W HS80 Artikelnummer: 2268K

59,99 €
Ausziehbare Tischverbreiterung für eine präzise Werkstück-Führung, 48 mm Schnitthöhe. Kompakte Abmessungen auch für die kleine Werkstatt. HM-Sägeblatt für gleichbleibende und präzise Schnittergebnisse. Sägeblattschutz für maximale Arbeitssicherheit. Mit Querschneidlehre und Längsanschlag.
Inklusive Hartmetall-Sägeblatt
Technische Daten
Abmessungen L x B x H 525 x 400 x 400 mm, Sägeblatt-Ø 210 mm, Tischgröße 525 x 400 mm, max. Schnitthöhe bei 90° 48 mm, max. Schnitthöhe bei 45° 45 mm, Gewicht 16 kg, Motor 230 V
Zusätzliche Information
Artikelbezeichnung
2268K
Lieferumfang
-

Special Price 59,99 €

Statt 99,99 €

Inkl. 19% MwSt. versandkostenfrei

Sie sparen 40,00 € (40%)


oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
Scheppach Tischkreissäge 1.200 W HS80 wurde bewertet mit 3.6 von 5 von 20.
Rated 1 von 5 von aus Poor quality build, inaccurate This saw has two major faults: (1) Firstly, the table itself is not even close to being flat and is about 2mm lower in the middle than around the outside. This was glaringly obvious by eye, but just to make sure I measured it by placing a steel rule across the top. (2) The table extension that slides in and out on the left hand side is not flush with the table, and is 2-3 mm higher at the front than at the back. Both of these faults mean that the saw will never cut remotely accurately especially when doing mitre cuts. The overall build is very poor and the manufacturer's QA is clearly lacking, so I would say save your money and avoid this tool.
Veröffentlichungsdatum: 2016-12-19
Rated 2 von 5 von aus Cheap and cheerful I purchased this machine as I wanted a small bench saw and the price seemed reasonable however as soon as I unpacked it I wished I had waited and bought a more upmarket sec this is very basic and the really disappointing feature is the measuring guide across both top and bottom these are only stickers and to make matters worse they were not even affixed in line which obviously makes it difficult to get the right measurements. I knew it was a cheap saw but would have expected better. My advice...save your money and when you have enough go for a more upmarket specification. I would NOT buy this saw after seeing it.
Veröffentlichungsdatum: 2013-08-05
Rated 3 von 5 von aus What do you expect Ignore the tapes on the ends of the table and use a metal engineers rule from the blade, even my top end table saw needed setting up to get the blade parallel to the fence, this is possible with the bolts under the table holding the bearings, at some of the discount price's available on line this is exceptional value for money, but don't expect cast iron beds or a decent blade, this unit makes an ideal base for small work if you are prepared to do a bit of work on the fittings and fixtures.
Veröffentlichungsdatum: 2015-11-13
Rated 1 von 5 von aus Just don't This table saw is a reasonable price. After using it for a few months I regret buying it. The blade is not parallel with the table top. The fence is incredibly annoying and almost impossible to get perfectly parallel to the blade. The extension feature is a complete waste of time. The most restricting factor is the miniscule cutting width its capable of. More often than not I have to use a circular saw instead. The scale is a plasticy tape, im sceptical as to how accurate it is. I changed the blade immediately as the stock one is shocking also the insert is plastic and lower than the table which makes cutting smaller pieces impossible. Anyone contemplating buying this product, even for rough work, I can only urge you in the strongest possible sense not to be tempted by the cheap price. Wait, save your money and buy something a few levels above it, the Makita looks like a proper job. Everything about this saw is cumbersome and you spend ages on simple tasks.
Veröffentlichungsdatum: 2014-09-04
Rated 4 von 5 von aus Value for money I purchased this saw to give me portable ripping facilities, I found the product to be value for money, yes its basic, but does what its supposed to do, you get what you pay for, it didn't cost a fortune so you don't get top of the range. It has performed all that I wanted from it and more. Recommended for light use, DIY work, certainly not site work or industrial use.
Veröffentlichungsdatum: 2014-02-02
Rated 4 von 5 von aus Good value for the DIYer Easy to use,ideal for DIY work. As a portable saw,i can't find any fault with it,plus it has the table extension I found very handy.
Veröffentlichungsdatum: 2015-04-24
Rated 5 von 5 von aus Good value at discounted price Delivery was as scheduled although no indication of delivery date or time from supplier hence some 4 stars rating . Saw performance was as expected and easy to set up, although it took some unpacking. Very heavy item to carry to the working area, but extremely good performance when used.
Veröffentlichungsdatum: 2018-07-01
Rated 5 von 5 von aus great value saw great saw for the money ideal purchess for what im going to use it for with many features often seen on more expensive machines
Veröffentlichungsdatum: 2016-10-21
  • y_2019, m_6, d_19, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_de_DE, sid_2268K, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de