Informationen zur Lieferung - hier ansehen

Mörtelharke 8 x 40 mm Artikelnummer: 1771T

5,89 €
Einsetzbar um Mörtel zu entfernen, bevor die Oberfläche mit einem Winkelschleifer bearbeitet werden kann. Wolframkarbid-Beschichtung für eine längere Lebensdauer. M14 Innengewinde.
Technische Daten
Zusätzliche Information
Mörtelharke 8 x 40 mm

Special Price 5,89 €

Statt 11,99 €

Inkl. 19% MwSt. versandkostenfrei

Sie sparen 6,10 € (50%)

Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

Mörtelharke 8 x 40 mm wurde bewertet mit 3.5 von 5 von 68.
Rated 4 von 5 von aus Makes raking out easy This mortar rake works well and makes the job of removing old pointing easy. To prolong the life of the mortar rake I used a disc cutter to cut the top and bottom of the old pointing. The mortar rake then removes the middle part of the pointing easily - particularly if the old pointing is soft, also you don't have to use so much sideways pressure which may lead to the rake "peg" snapping. It cleans up the joint well and excavates the pointing to about a 1 1/2 inch depth. Just be aware that the mortar rake doesn't last forever - it will wear out, but makes the job very easy. Use the Roughneck Mortar Gun to re-fill the pointing - also a wonderful tool.
Veröffentlichungsdatum: 2014-08-27
Rated 5 von 5 von aus 40mm & 100mm Mortar Rakes 40mm rake is a great tool for cleaning out vertical brick joints but very slow on horizontal joints so use a 8mm thick disc as its fast. As the 40mm rake tip wears down it can be cut back with a hack saw it give you 2 x 20mm rakes for the price of one. The 100mm rake is not able to reach the full depth of a brick and will snap if pushed, but it sure makes brick removal easy work without loosening other bricks.
Veröffentlichungsdatum: 2016-09-10
Rated 5 von 5 von aus Good for small areas Been doing a lot of pointing removal which is lime based , very dusty .For long lines of pointing removal i prefer a Turptech pointing removal tool mounted on a angle grinder much more accurate than a blade and more nimble .This item is very good for small areas including all those places you cant get the angle grinder in .Can also be used in a drill (with adaptor) for corners and very tight spaces .good tool to have in toolbox .Tip let the tool do the work dont push it and make sure eye and face protection is worn
Veröffentlichungsdatum: 2017-07-26
Rated 5 von 5 von aus Mortar Rake I used this mortar rake to rake out the old mortat between the slabs in my patio, prior to repointing the slabs. The mortar rake worked extremely well and lasted a great deal longer than I expected it to do. I did in the end assist in extending its life by taking a relief cut down the centre of the mortar line with a 9 inch angle grinder & then went back over the run with the 4 1/2 inch angle grinder with mortar rake at which point the mortar was just falling out the joints easy peasy. Would deffinately use it again & highly reccomend it to others. Not tried it on brick work but I'm sure the same principle would apply. Didn't rate the features high as it has only one but it does that one thing very well.
Veröffentlichungsdatum: 2011-08-03
Rated 5 von 5 von aus Excellent Value This is the second one I have bought from screwfix, last one must have lasted 3 years or so and seen me through quite a bit of repointing.Superb value and great bit of kit,
Veröffentlichungsdatum: 2015-04-24
Rated 5 von 5 von aus Great Time Saver Re-pointing is not the most enjoyable job, but with this tool making it so easy, it almost is!
Veröffentlichungsdatum: 2014-06-16
Rated 5 von 5 von aus Mortar rake Brilliant tool for raking out cement joints made my job a whole lot easier and I completed the job in half the time it would of taken me highly recommended
Veröffentlichungsdatum: 2018-02-01
Rated 5 von 5 von aus Brickwork grinding tool this piece of kit is great for gringing out old pointing. Does the job with ease. throw away your hammer and chiesel and get this tool for your grinder.
Veröffentlichungsdatum: 2012-10-02
  • y_2019, m_7, d_17, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_68
  • loc_de_DE, sid_1771T, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de