Erbauer Zapfenschneider 12,7 mm Artikelnummer: 5348T

7,99 €
Profi-Qualität. Zur Erstellung von Holzdübel zum Beseitigen der Holzbeschädigungen.
-
Technische Daten
-
Zusätzliche Information
Artikelbezeichnung
5348T
Lieferumfang
Erbauer Zapfenschneider 12,7 mm
7,99 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
Erbauer Zapfenschneider 12,7 mm wurde bewertet mit 4.5 von 5 von 11.
Rated 3 von 5 von aus plug cutter These cutters are okish They work fine on soft material however its not a top quality plug , the finished article is rough and does not make a perfect fit in hard wood a lot of the problem is because of heat generated distortion when they blunt ..Having installed thousands of feet of oak recently I can state that they don't last very long in all cases the heat generated causes the cutter to distort this makes the prong catch the material and snap off. If you want a high quality finish you need a high quality set these last about 50 cuts in oak you need to use low speed and take it very easy the cutter is also quite deep and can produce a long plug . the trend cutters are far better.
Veröffentlichungsdatum: 2017-06-02
Rated 5 von 5 von aus A good product Bought this to cut some plugs for an Oak mantel shelf. I've not used in the Oak yet but seem fine in softer wood. I would recommend though it be used in a pillar drill to get straight plugs. I would also recommend it drilling slowly so not to burn them out.
Veröffentlichungsdatum: 2015-10-10
Rated 5 von 5 von aus pretty good Bought this felling a little bit dubius as to wether would be any good as having had cutters before an not been that good without a bit of titivation . Used today for first time and must say exellent bit of kit , cut clean and fast with cordless drill
Veröffentlichungsdatum: 2018-04-09
Rated 4 von 5 von aus Not bad Not bad , feels well made ,has kept edge , on other plug cutters you can buy( more Expensive) they shamfer the plug so it goes in easier, this plug cutter just cuts a cylinder , so a you may want to sand the edge to make the plug go in easier .
Veröffentlichungsdatum: 2018-04-15
Rated 4 von 5 von aus erbauer plug cutter What can i say sharp does the job,good price.what more can you ask for.
Veröffentlichungsdatum: 2015-09-17
Rated 4 von 5 von aus Good plug cutter Can't fault it really for the price, does what it's supposed to.
Veröffentlichungsdatum: 2015-05-31
Rated 4 von 5 von aus Good plug for a Plug Cutter! This item looked a little fragile on first inspection, but after reading reviews, I deburred the cutting edges, then tried it at slowest speed in my bench drill on a piece of oak. It cut very sweetly and produced five plugs, all of the specified diameter. So far so good!
Veröffentlichungsdatum: 2017-06-08
Rated 5 von 5 von aus VFM item As other reviewers have said, works perfectly if you use a pillar drill. Needed a quick polish with a piece of wet n dry to deburr it prior to using it otherwise it is a perfect bit of kit.
Veröffentlichungsdatum: 2016-11-12
  • y_2018, m_12, d_7, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_de_DE, sid_5348T, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de