Informationen zu Lieferzeiten – hier ansehen

Erbauer Metalltrennscheibe 230x2 mm Artikelnummer: 2932T

5,99 €
Gute Qualität. Langlebige Scheibe. Aluminium-Oxid, Präzisionstrennscheibe, lang anhaltend, Handelsqualität. Ermöglicht schnelle und saubere Schnitte.
Technische Daten
Zusätzliche Information
Erbauer Metalltrennscheibe 230x2 mm

Special Price 5,99 €

Statt 11,99 €

Inkl. 19% MwSt. versandkostenfrei

Sie sparen 6,00 € (50%)


Markt wählen

Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

Erbauer Metalltrennscheibe 230x2 mm wurde bewertet mit 4.5 von 5 von 24.
Rated 5 von 5 von aus Excavator buckets Bought these to try out as others I had tried weren't up to much. I am very impressed with these discs. I refurbish excavator digging buckets for construction company's, and need to cut through tough thick steel. I used them on preformed Hardox bucket cutting edge steel section, Hardox is a hardened steel purposely made for hard wearing applications, I used these discs to cut through 200mm x 20mm Hardox to cut off a section to length. I found each disc would cut through this section up to 4 times per disc, and each cut took between 3 to 4 minutes. So at about £0.60p per cut commercially for me they are very productive both in economy and speed. I will definitely buy these again and again. Am, going to try another manufacturer to see how they perform relative to these. Will let you know.
Veröffentlichungsdatum: 2016-01-25
Rated 5 von 5 von aus fantastic value 5 stars I had to cut down some old scaffolding poles and had bought some slightly cheaper disks to do it. What a false economy that was. I got through all 5 of those and only 20% of the work. The ebauers were fantastic. The speed they cut at was remarkable, and as for wear, i was getting through 4 times the work per disk, saving me time changing disks and as it turns out, quite a bit of money. Are they worth £9.99. My answer is ALL DAY LONG.
Veröffentlichungsdatum: 2014-09-22
Rated 1 von 5 von aus Out right dangerous I use 9" slitting discs every day for some thin, but mainly thicker materials and bought these. They are flexible and a little more than I expected, but the reviews did mention this so thats fine, but it did mean I couldn't push hard for thicker stock. I use these to cut up 20mm thick plate for instance. However almost instantly the discs start to glaze over and stop cutting, but start heating instead. At this point, the disc edges started to disintegrate and started throwing off chunks. I suspect they would be a bit rubbish but useable on thin stuff like a chassis, but on thicker stuff like RSJ's they are very dangerous.
Veröffentlichungsdatum: 2018-02-25
Rated 5 von 5 von aus Excellent value from Screwfix I bought three packs of 5 and used 10 of the discs to cut up a 2,730 litre (600 gallons) steel tank 4mm thick into pieces that two people could just about carry together. Although only 2mm thick I felt confident using the Erbauer cutting discs and none of them shattered. They did wear down a bit quicker than I thought they should and I would estimate that 2 metres of steel 4mm thick is about the limit of each disc. However, there is still enough left to be able to use it on my 115mm angle grinder. I used a 110V reciprocating saw to cut off the front end of the tank as this didn't cause any sparks and once inside the tank I could clean out all the residue kerosene and muck and then I could work inside with the Erbauer cutting discs quite safely. You can see the job on You Tube if you search on Erbauermetalcutting. The crash at the end of one of the videos is the back end of the tank falling off and onto the wall. I was working in a very confined space in a vault under a pavement.
Veröffentlichungsdatum: 2015-09-09
Rated 5 von 5 von aus Excellent Product We have been using these products on decommissioning of factory equipment and after using a number of different discs, my guys on site, swear by these and have made easy work of the scrap.
Veröffentlichungsdatum: 2017-02-17
Rated 5 von 5 von aus Cutting disc Always used 3.2 mm disc until now and bought 2 mm by accident . Goes through steel like butter and the wear rate is much slower than the 3.2. Fantastic , makes cutting fun.
Veröffentlichungsdatum: 2012-09-10
Rated 5 von 5 von aus Decent cutters Decent cutting disks worked very well chopping up some old chassis we had to deal with. at least until the grinder broke. disks were great though no complaints at all.
Veröffentlichungsdatum: 2017-11-07
Rated 5 von 5 von aus Good Discs Used for cutting through 10mm hardened steel plates and some angle irons. Wasn't impressed with the first disc as it basically shredded instantly. Rest of the pack held up great and cut through tough materials very precisely with minimal effort. Definitely a good buy, will be getting more.
Veröffentlichungsdatum: 2015-05-28
  • y_2019, m_6, d_18, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_de_DE, sid_2932T, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de