Informationen zu Lieferzeiten – hier ansehen

Erbauer Diamant Lochsägekranz 38 mm x 150 mm Artikelnummer: 7080K

12,39 €
Exzellente und schnelle Schnitte in allen Arten von Beton und Gemäuern.
-
Technische Daten
-
Zusätzliche Information
Artikelbezeichnung
7080K
Lieferumfang
Erbauer Diamant Lochsägekranz 38 mm x 150 mm

Special Price 12,39 €

Statt 24,99 €

Inkl. 19% MwSt. versandkostenfrei

Sie sparen 12,60 € (50%)


oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
Erbauer Diamant Lochsägekranz 38 mm x 150 mm wurde bewertet mit 4.6 von 5 von 18.
Rated 5 von 5 von aus Great hole cutter I purchased this as I needed to fit a sink waste pipe through a solid 9inch brick wall. Absolutely no problem for it...a good clean quick job by someone who had never used such an item before. Highly recommended. Used with the Diamond Core SDS Plus Arbor which I purchased at the same time
Veröffentlichungsdatum: 2015-10-21
Rated 5 von 5 von aus Core drill I have other sizes from this manufacturer and have had no issues at all with them, all cut well repeatedly and this one was the same so had no hesitation buying it.
Veröffentlichungsdatum: 2015-08-07
Rated 3 von 5 von aus Tough Going Bought to replace same size competitors core drill bit which stopped cutting 200mm into a 300mm solid wall, 100mm dense concrete blocks with 100mm concrete between. it took hours to get through with both bits. Had hoped the Erbuer would have cut faster but it did not. Perhaps I should have paid more and bought the Marcrist, which I would hope has real diamond chips.
Veröffentlichungsdatum: 2019-01-26
Rated 4 von 5 von aus 25 core holes then it gave Up! Bought with set of 3 cores and accessories as late on Friday night and screwfix still open. I have now been converted. First 10 or so holes were like going through butter as they were breeze block walls, then a flint wall which took longer but managed and the next 10 were engineering blocks and brick which it dealt with, but today she finally gave up and the teeth folded in on themselves. Buying another tomorrow. I also use the 5" and 6" cores about 3 times a week and they are just as good
Veröffentlichungsdatum: 2017-06-19
Rated 4 von 5 von aus Good job first time out! Never used the Erbaur range before, but it all went smoothly, although it is important to follow the manufacturers guidelines re drill speed and patience! Easy to assemble with the Hex arbor and the guide drill. Drilled thru a 20 x 10 x 5cm block paving brick and it was a neat, right size drill hole. Special thanks to the staff at the local Screwfix store who sorted everything I wanted in about 10 minutes flat! Great service! No hesitation in recommending this brand / product
Veröffentlichungsdatum: 2015-09-11
Rated 5 von 5 von aus Does the job Needed to punch a hole through a double skinned wall to push a waste pipe through. With a bit of heave ho, got through easily enough and pipe fitted perfectly. The drill bit cut through both brick and block.
Veröffentlichungsdatum: 2018-04-04
Rated 5 von 5 von aus amazing performance Used this with a standard drill at the lower speed and it cut through very solid 1950s blue-brick (Engineering brick?) in under half a minute
Veröffentlichungsdatum: 2018-12-06
Rated 5 von 5 von aus Top product Gets the job done, i will be purchasing again. Can't fault the product one bit. Highly recommended
Veröffentlichungsdatum: 2018-12-12
  • y_2019, m_6, d_18, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_de_DE, sid_7080K, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de