Lagerverkauf - 13.02 - 24.02.2019

Erbauer Bit-Metall Lochsägekranz 51 mm Artikelnummer: 3125K

5,99 €
Mit langlebigem Stahlkörper. HSS-Zähne mit gleichmäßigen Abständen für einen einfachereren Schnitt.
Technische Daten
Zusätzliche Information
Erbauer Bit-Metall Lochsägekranz 51 mm
5,99 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)


Markt wählen

Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

Erbauer Bit-Metall Lochsägekranz 51 mm wurde bewertet mit 4.6 von 5 von 18.
Rated 5 von 5 von aus Cuts through hardwood I bought this cutter to drill a 51mm hole through hardwoods maple and cherry. I set the cutter up in my drill press and made the cut halfway through from each side. It produced a perfectly smooth hole - I was well pleased. I have to use the cutter on several occasions over the coming weeks so I'll get an idea of its durability. I nearly bought the cutter though without the arbor which is vital to the set up. I only learned that I needed the arbor through one of the Q&As.
Veröffentlichungsdatum: 2018-06-12
Rated 5 von 5 von aus Half the price of Drews! If you don't have it already - you have to use an... Erbauer 11mm Holesaw Arbor 32-152mm (1779H). With this - it works great! Without it - It won't work at all.
Veröffentlichungsdatum: 2017-04-20
Rated 1 von 5 von aus Diabolical I needed a new 50mm hole saw after I found the one I had in the bottom of my tool box had seen better days. Screwfix was in walking distance from where I was working and I needed it for just 1 hole to cut a hole on a electrical cabinet backing plate. Gave this a shot as surely it would make one hole? After 1hr of perseverance and another 15mins trying to clean up the mess it had made of the backing plate it did just 1 hole no thicker than 2.5 mm. Needless to say it went back for a refund and I probably won't be venture into the realms of erbauer hole saws again!
Veröffentlichungsdatum: 2019-01-10
Rated 5 von 5 von aus Super cutter (Holesaw) Needed this - along with the auger - as I had to replace two shelvings on my fountain, both of which required an accurate circular whole cut. This did the job VERY EASILY and accurately - especially considering that D.I.Y. is not my forte!!
Veröffentlichungsdatum: 2016-09-09
Rated 4 von 5 von aus The saw, the hole saw and..... Its a hole saw, what can I say? I bought this hole saw to cut one hole so I wasn’t prepared to pay a lot of money. No one else in the area had one of the same size cheaper so I bought this one. I would say that it’s as good as Starrett.
Veröffentlichungsdatum: 2017-08-11
Rated 5 von 5 von aus why de walt? usually purchase a premium brand product at premium prices!!! saw this make in store, gave it a try, I won`t be buying the premium ones again , these were sharp, stayed sharp after use, did the job perfectly, well done screwfix !!
Veröffentlichungsdatum: 2015-12-05
Rated 5 von 5 von aus Great for the job in hand I needed to drill through 4" waste pipe and purchased a flat wood 40mm bit in error. Tried using it but it split the pipe into shards. I then purchased this holesaw which was the correct part for the job. Went through the pipe with ease. You do need to look at the part that fixes to this for it to be used in a normal drill. I did get the 9mm screw on part but needed the 11mm one instead. ( a thing to look out for). Always check the parts before you leave the store and the staff are there to help you if you need it.
Veröffentlichungsdatum: 2015-10-14
Rated 5 von 5 von aus Great Holesaw I bought this Holesaw to drill holes big enough for plug heads to fit through. It worked perfectly on plasterboard, chipboard and sheet MDF. Struggled a little on 25mm thick MDF but got the job done. All of the holes have been neat. This Holesaw was great value for money and I'd recommend it to others.
Veröffentlichungsdatum: 2015-11-21
  • y_2019, m_2, d_18, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_de_DE, sid_3125K, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de