Erbauer Bit-Metall Lochsägekranz 152 mm Artikelnummer: 2443K

16,99 €
Mit langlebigem Stahlkörper. HSS-Zähne mit gleichmäßigen Abständen für einen einfachereren Schnitt.
Technische Daten
Zusätzliche Information
Erbauer Bit-Metall Lochsägekranz 152 mm
16,99 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

Erbauer Bit-Metall Lochsägekranz 152 mm wurde bewertet mit 3.3 von 5 von 13.
Rated 1 von 5 von aus Totaly useles for Mild Steel I puschased this hole saw for cutting a hole in 2mm mild steel register plate. It utterly failed to do this It scratched the surface,but after half an hour it was making no impression.and the teeth were worn out. I used a coolant to to aid cutting but this made no diffrence. I had to resort to a jig saw which floated through the 2 mm plate effortlessly. This was dissapointing as I searched the Screwfix website for a metal cutting holesaw and it advertised it as being suitable.
Veröffentlichungsdatum: 2014-10-27
Rated 1 von 5 von aus ONE HOLE WONDER!! Bought this to drill 4x 6 inch holes for extract fans through very thin metal walls less the 0.5cm thick only managed one hole before going blunt and put a stop to the job.......useless!! Only buy this item if you intend to use on plasterboard or a straw house.
Veröffentlichungsdatum: 2014-12-09
Rated 1 von 5 von aus Absolutely useless One of the worst hole saw I've ever used I used it to cut a sheet of aluminium and it was blunt after the second cut. This hole saw couldn't cut a birthday cake without getting blunt save your money and buy something else more reliable
Veröffentlichungsdatum: 2015-04-03
Rated 3 von 5 von aus It's alright This cutter was alright. I had a lovely Lennox cutter, but unfortunately I'd blunted it. I don't use 6" cutters often, so I figured an Erbauer would do. It's perfectly good enough for most things, but it could do with a bit more depth. It's fine for thin material, I had to cut some corrugated steel sheet but found the corrugations deeper than the cutter so I had to finish with a jig saw.
Veröffentlichungsdatum: 2017-08-10
Rated 5 von 5 von aus Large holesaw Great product have loads of erbauer gear good for my work and at home
Veröffentlichungsdatum: 2017-06-22
Rated 1 von 5 von aus get what you pay for? Bought this even though thought a bit cheap. Needed to cut two holes through alluminum cladded wall.Wall was around 2" thick with a 2 sheets of 1.5mm alliminum sandwhich between foam insulation.First cut was fine but only managed to partially cut through second hole as cutter blunted . Ihad to finish job off with jigsaw. A bit dissapointed i thought it would manage a bit more than trhis..
Veröffentlichungsdatum: 2015-11-18
Rated 4 von 5 von aus Good and bad I used this to cut a hole for an extractor fan, it easily cut through Cellotex insulation and 20mm wooden sarkin and did a good job. Examining the cutting teeth afterwards showed quite a lot of wear which surprised me. It was perfect for the job but forget long term reliability, as others have found it is useless on mild steel.
Veröffentlichungsdatum: 2015-02-25
Rated 5 von 5 von aus works well I got this to put a 6" hole down through roofing insulation and sarking board. Used it on low speed in the Makita and it did the job nicely. Perhaps not the most challenging job but it also trimmed segments out of the slate battens without jumping. Key point is to note the max speed recommendation; must be used slowly. Suspect this might be an explanation of some of the bad experiences in other reviews.
Veröffentlichungsdatum: 2018-12-24
  • y_2019, m_3, d_20, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_de_DE, sid_2443K, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de