Informationen zu Lieferzeiten – hier ansehen

Erbauer Bit-Metall Lochsägekranz 102 mm Artikelnummer: 1058K

5,39 €
Mit langlebigem Stahlkörper. HSS-Zähne mit gleichmäßigen Abständen für einen einfachereren Schnitt.
Technische Daten
Zusätzliche Information
Erbauer Bit-Metall Lochsägekranz 102 mm

Special Price 5,39 €

Statt 10,99 €

Inkl. 19% MwSt. versandkostenfrei

Sie sparen 5,60 € (50%)


Markt wählen

Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

Erbauer Bit-Metall Lochsägekranz 102 mm wurde bewertet mit 4.6 von 5 von 40.
Rated 5 von 5 von aus Value for money product Bought this hole saw for a job that I knew was going to be a tough one. 40 plus holes in 25mm and 18mm Marine plywood. It performed brilliantly and is as sharp now as it was when I started. I have no hesitation in putting it up against any other make and what a price! I need another size 76mm and will be purchasing this make with no thought of looking elsewhere. Just buy it look after it and you will be like me. Very happy. The quality of the cut is good as well. Plywood is all varnish finish so I have to cut from both sides to avoid splintering but every cut has been spot on. Albert.
Veröffentlichungsdatum: 2019-01-28
Rated 5 von 5 von aus great tool but you also need.. the tool is great for the job and I can't complain, cuts holes in 23mm planks like in butter. You need to know that you would also need erbauer arbor for it as in my case none other brands arbors could fit it
Veröffentlichungsdatum: 2016-10-19
Rated 5 von 5 von aus Just the job Perfect for installing 100mm Vents in OSB or plywood. *tip try not to force the holesaw and drive into the centre of wood...stop, then if possible cut from the otherside of the work. This way makes for a clean cut.
Veröffentlichungsdatum: 2016-11-17
Rated 5 von 5 von aus Great Value Cheaper than the rest but perfect for cutting access holes into ceiling plaster board. Why pay more?... Just remember you will need a large arbour like this 12437
Veröffentlichungsdatum: 2014-05-26
Rated 5 von 5 von aus Number 1 holesaw This holesaw is perfect for any extractor fan, light and fab or just about anything that requires this size hole, strong, sturdy and very reliable, would definately recommend.
Veröffentlichungsdatum: 2018-10-01
Rated 5 von 5 von aus Ace hole saw.... I have two sets of hole-saws where the various sizes fit into the appropriate concentric groove of the arbor body, then twist to "lock" into place. They've done previous jobs but are no patch on the solid build of this cutter or the other sizes bought from Screwfix - definitely a good buy and being one piece and rigid gives a cleaner cut. The only hiccups I experienced was needing circlip pliers to remove the retaining circlip off the Arbor and then finding a need to move the securing plate and pins around 180º for better alignment and then wiggle it into close contact with the hole-saw's base - and then tighten the locking "nut". Took a few minutes of faffing before I noticed a slight discrepancy of arbor holes and hole-saw holes alignment .
Veröffentlichungsdatum: 2015-12-02
Rated 5 von 5 von aus Cuts big holes! Great value, does the job. Used this to make holes for fitting extractor ducting in wood. Also useful for cutting big holes for cable access! Make sure you get the right arbor!
Veröffentlichungsdatum: 2014-11-19
Rated 5 von 5 von aus Good quality This is a good quality, strong holesaw. I also purchased the Erbauer arbor with it. Note that you cannot cut to anything like the full depth implied by the depth of the holesaw unless you drill or cut a smaller hole in the material that you are working on to provide clearance for the base of the arbor. Otherwise, the arbor will soon descend and make contact with the material, preventing further progress.
Veröffentlichungsdatum: 2016-02-04
  • y_2019, m_6, d_15, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_de_DE, sid_1058K, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de