Bosch Stichsägeblätter T 101 AOF 3er Pack Artikelnummer: 9345T

11,49 €
Für gebogene und saubere Schnitte im Laminat. Exzellente Ergebnisse ohne hohen Materialverbrauch.
  • Länge: 79mm
  • Verzahnung: 1,4 mm
Technische Daten
Zusätzliche Information
Bosch Stichsägeblätter T 101 AOF 3er Pack
11,49 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

Bosch Stichsägeblätter T 101 AOF 3er Pack wurde bewertet mit 3.9 von 5 von 25.
Rated 5 von 5 von aus Excellent blade for laminates This is a Swiss-made Bosch blade with no set to teeth. Cuts a fine almost chip-free line right down to 10-15 mm diameter curves. Use a masking tape over the surface to stop jigsaw foot from marking and help prevent breakout - don't use too much pendulum action. A couple of reviwers commented about breaking etc. - the Bosch spec states 10-15 mm max depth of cut - if you try with a 38-mm worktop full of rubbish chipboard of couse it's going to break and bend - for something like a sink cutout use a much sturdier blade - common sense.
Veröffentlichungsdatum: 2015-11-16
Rated 5 von 5 von aus Not 1st choice but glad I did I went into my local branch to get some blades specifically for laminate. I had a large front room to floor and the laminate was good quality, so I didn't want to muck it up using wood blades. I was originally going to buy the unbranded blades, as they seemed to get good reviews but these were all out of stock. So I bought these Bosch ones, which were quite a bit more. However, perhaps that was a wise decision. These blades (or should I say blade, as I only used one) worked exceptionally well, with nice straight cuts and little damage to the laminate surface (you had to look very closely to see any). I have no idea if the cheaper blades would have done as good a job but I still have two of these blades left for future use, so I doubt I will be finding out in the near future.
Veröffentlichungsdatum: 2018-06-06
Rated 5 von 5 von aus Does excatley as discribed If used slowley you get a perfect curved cut even in 40mm worktop
Veröffentlichungsdatum: 2011-05-19
Rated 5 von 5 von aus Best Blades I got these blades as I had a lot of cuts to do on a laminate floor, I was unsure after reading some of the other reviews but these are the best blades I have ever used. No chipping of the laminate and they last so well I am still on the same blade after about 20m of cuts. As for the bad reviews i can only think they either brought the wrong blades for the job they were doing or they don't know how to use there tools. Don't buy cheap buy wise.
Veröffentlichungsdatum: 2018-04-04
Rated 5 von 5 von aus Good blades Good blades and copes easily with cutting laminate flooring. Do not blunt as quick as wood blades do and easy to use for corners.
Veröffentlichungsdatum: 2018-07-21
Rated 5 von 5 von aus Very impressive Bought these for cutting laminate flooring did a very good job. good clean cuts and no damage. Well impressed
Veröffentlichungsdatum: 2018-04-16
Rated 5 von 5 von aus Used to cut laminate flooring These produced really good cuts when putting down laminate floor, id buy them again if required
Veröffentlichungsdatum: 2015-07-28
Rated 1 von 5 von aus They cut well - but ...... They do give a lovely clean cut. The short tooth pitch and thin kerf also produce great results whilst scrolling and doing tight curved cuts in 18mm softwood. But they fracture massively easily, and the price is outrageous. Go for the T101AO instead - you'll get a pack of 5 for half the price of these.
Veröffentlichungsdatum: 2019-02-27
  • y_2019, m_3, d_20, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_de_DE, sid_9345T, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de