Lagerverkauf - 13.02 - 24.02.2019

Bearbeitungsscheibe 115 mm Artikelnummer: 6716T

8,99 €
Nicht-gewebtes Material. Verwendbar mit 4½" / 115 mm Winkelschleifern (max. Arbeitsgeschwindigkeit 11.500 rpm). Entfernt Farbe, Lack und Rost von Metall, Holz, Fiberglas, Granit, Ziegel und Stein. Verstopft nicht.
-
Technische Daten
-
Zusätzliche Information
Artikelbezeichnung
6716T
Lieferumfang
Bearbeitungsscheibe 115 mm
8,99 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
Bearbeitungsscheibe 115 mm wurde bewertet mit 3.9 von 5 von 54.
Rated 5 von 5 von aus Fast paint removal These are great for quickly removing paint without damaging the steel surfaces underneath. They are far far more effective than rotary wire brushes yet gentler than sanding discs or similar. Paint is removed in an instant. The only downside is that they don't last that long, especially if they are used on edges or corners. They last reasonably well if you are careful and finish awkward bits by other means. They are quite expensive given the speed they can be used up, but it is often worthwhile for paint job preparation as hours of work can be done in minutes. I haven't found anything better yet, even a sandblasting gun for my air compressor was not nearly as good.
Veröffentlichungsdatum: 2011-10-05
Rated 5 von 5 von aus Great time saver!! Needed to remove several layers of masonry paint from the concrete window sills on my house as I wanted them back to the natural look but wasn't sure what to use. I bought this prep wheel along with some other sanding type discs for my angle grinder not really knowing what would work best. I chose to start with this preparation wheel and it worked brilliantly, just flicked the paint off with no damage to the sills and actually left a vey smooth finish. They do wear quite quickly especially if you have to apply a bit more pressure so I have had to buy a couple more to finish the job but they do what I require so it's a worthwhile purchase.
Veröffentlichungsdatum: 2017-07-06
Rated 5 von 5 von aus Excellent product Used this to remove paint and rust from the swing arm on my motorbike and it was effortless. Took off all paint and rust without damaging the metal. Took no time at all. Well worth the money.
Veröffentlichungsdatum: 2015-09-28
Rated 4 von 5 von aus Surface recovery This preparation wheel is fantastic for cleaning facing brick work, it removes paint, errant mortar, efflorescence and everything else that I have encountered on reclaimed Cafferata bricks with ease and speed (see pictures). The only downside to this product is its life span, these wheels on average are lasting me 200 faces. I recommend this product but advise you to buy two at a time.
Veröffentlichungsdatum: 2014-07-06
Rated 4 von 5 von aus Just don't lean on the wheel I used these wheels to grind the grime and gunk off a set of ancient iron/steel railings at a prestige property in Hampshire. The railings had been neglected for many years and the client wanted me to use wire brushes on power tools, however I chose to use these pads as they struck me as a "Softer" option to using steel on steel. They worked well, they didn't mark the surface of the steel too badly and they didn't throw sparks as the wheel degrades rather than cutting into the metal. To do a 7 metre run of railings we used 4 wheels which, given their cost, was acceptable. We learnt early on not to lean too hard on the grinder as all it did was eat the wheel. being slightly flexible and sacrificial it worked well on the curves of the railings and also rapidly removed the detritus on the flat plates. We then finished with a combi colour undercoat primer, and gloss black in the same - Looking good!!
Veröffentlichungsdatum: 2013-08-20
Rated 5 von 5 von aus Great product Works well removing rust from cast iron guttering! Saved a lot of time and effort
Veröffentlichungsdatum: 2012-09-18
Rated 1 von 5 von aus Poor value - spec. has changed I had one of these a while back and it was very good value for money. I needed a couple for a job this week and bought two. They are only half the thickness of the old version. So much so that you hardly get any use out of them before they are worn down to the top of the grinder fixing bolt. You end up having to use it tilted and end up wasting a lot. Avoid.
Veröffentlichungsdatum: 2015-04-21
Rated 5 von 5 von aus Great for paint Stripped a 100 litre tractor diesel tank with several layers of paint with one wheel. Strips paint back to bare metal brilliantly. Doesn't abrade/damage the underlying metal but doesn't shine it off like a wire brush either - so new paint keys well. Best on flat(ish) surfaces as will wear quickly on sharp edges or if forced. Would definitely recommend.
Veröffentlichungsdatum: 2017-06-13
  • y_2019, m_2, d_21, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_54
  • loc_de_DE, sid_6716T, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de