• Lieferbedingungen
  • Widerruf
  • Zahlarten
  • Trusted Shops
  • Top Shops

Winkel-/Eckspanner 65 mm Artikelnummer: 8735R

9,49 €
Dank flexiblem Kopf universell einsetzbar. Auch unterschiedlich große Werkstücke können dadurch gleichzeitig gehalten werden.
Aus Druckguss-Aluminium hergestellt
Technische Daten
Max. Öffnung: 2 ½“ (65mm)
Zusätzliche Information
Lieferumfang
Winkel-/Eckspanner

Special Price 9,49 €

Statt 12,99 €

Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

Sie sparen 3,50 € (26%)


oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
Winkel-/Eckspanner 65 mm wurde bewertet mit 3.4 von 5 von 23.
Rated 5 von 5 von aus Good product to use. Bought 4 of these to set out drawers for the shed. What can you say provided the cuts are accurate these give you the right angle every time. Saved loads of time. The only downside are the handles, they really do let the product down, they are plastic whilst the rest of the mitre is cast alloy, had to take 1 back for replacement.
Veröffentlichungsdatum: 2014-10-29
Rated 4 von 5 von aus Use with care There are many ways to fail to get good results with mitre clamps in all price brackets. This one is a budget model, but I'm getting decent results when using them. The casting is square and this clamp will hold the work square if it's set up carefully. Best results come from using these four at a time and joining all four corners simultaneously. If using two or one at a time you need to be sure the work piece ends not in the clamp(s) are supported at exactly the same height as the ends in the clamp and that you check the joint is square as you tighten it. Fail to do this and the result can be a squiffy joint. But that's true of many mitre clamps including the considerably pricier Stanley ones I also have. Using one clamp on it's own can work, but it's easy to get a fractional error in each joint and find the the wood doesn't meet up when you get to the last joint. The four of these I have are several years old, have been used on a good number of occasions but not constantly. They are hung up out of harms way when not in use and not overtightened. So far nothing has broken on any of them. For the price, used appropriately, I find these a useful piece of kit.
Veröffentlichungsdatum: 2015-11-16
Rated 1 von 5 von aus por quality I used two of theses twice and they dropped to bits a bit cheap and tacky feeling.
Veröffentlichungsdatum: 2008-10-09
Rated 4 von 5 von aus Good quality product I bought two of these clamps to help line up joints in a cupboard I am making. Everything about these clamps is good quality except (as other reviewers have noted) the handle, which is made from a plastic material formed directly onto the end of the threaded rod. However, you do not need to pull the clamp very tight in order for it to do the job, so if you are careful and don't tighten excessively the handle will probably last.
Veröffentlichungsdatum: 2016-01-20
Rated 5 von 5 von aus Mitre clamp Purchased to glue back picture frames. Held frames really firm so able just to use wood glue. Simple but very effective product.
Veröffentlichungsdatum: 2017-01-02
Rated 1 von 5 von aus Absolute garbage Handle broke off the very first time I used it to do an edge join on 2 600mm long bits of wood - hardly a demanding application Plastic handle immediately cracked down the length and came off of the screw drive, then spent 10 minutes trying to get the thing off my workpiece. Not sure who designed this, or what they were thinking when they did, but I wouldn't bother with it...
Veröffentlichungsdatum: 2014-12-31
Rated 5 von 5 von aus brilliant mitre clamp For a cheap bit of kit, this mitre clamp was effective enough to hold a 2m length of 5mm angle iron against a horizontal member while being cut with an angle grinder and it didn't shift at all. I've had other more expensive mitre clamps which were far less effective. Brilliant bit of kit. Highly recommend.
Veröffentlichungsdatum: 2016-03-28
Rated 5 von 5 von aus Champion clamp Good size, sturdy construction and versatile. All in all excellent value for money and strong enough to cope with most jobs, I would definitely recommend adding it to your tool box.
Veröffentlichungsdatum: 2016-04-11
  • y_2017, m_9, d_19, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_de_DE, sid_8735R, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de