• Lieferbedingungen
  • Widerruf
  • Zahlarten
  • Trusted Shops
  • Top Shops

Erbauer Bolzenlöser-Set 6-teilig Artikelnummer: 1158K

13,99 €
Ideal für abgerundete, übermalte oder verrostete Bolzen und Muttern. Laser geätzte Markierungen. Aus Schwarzoxid.
-
Technische Daten
Max. Drehmoment 80Nm.
Zusätzliche Information
Lieferumfang
7/16, 15/32, ½, 9/16 und 3/8" Bolzen und Muttern Entferner und 3/8" Anschlussadapter.
13,99 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
Erbauer Bolzenlöser-Set 6-teilig wurde bewertet mit 4.7 von 5 von 59.
Rated 5 von 5 von aus superb! This is the kind of thing you dont need very often, but when you do it's an absolute god send. I have removed completely rounded off nuts with these in a matter of minutes. The removers have yet to show any signs of wear, they seem to be very tough. The design is excellent, you just need strong hand pressure to start it off. The inner design means it works its way down as you turn until it grips extremely tight. Beats a pipe wrench without the access you need to use that tool. In case you were wondering the metric sizes of the removers are 10, 11, 12, 13 and 14mm.
Veröffentlichungsdatum: 2015-03-04
Rated 5 von 5 von aus BRILLIANT After successfully rounding off a bolt on the underside of an EGR valve and using all my strength to remove it unsuccessfully i had resigned myself to fact car was going to a garage where the mechanics would no doubt talk about the plonker who rounded off the bolt (me)....access was very restricted and the bolt was on the underside....still took three attempts but crack it went.....total godsend just buy them now.! saved me cash and the humiliation of telling a garage mechanic id rounded the bolt off...needless to say i didnt over tighten when i replaced the bolt, lesson learned, don't hesitate these are a brilliant product....bolt was a 12mm and the box covers metric sizes 10 11 12 13 14mm
Veröffentlichungsdatum: 2016-09-18
Rated 5 von 5 von aus WOW I am not normally one for reviewing anything, However I read the reviews on this and thought it probably wouldnt work but for the price I didnt have much to loose. I was working on my car and managed to round a bolt from 15mm down to 13mm. I tried heat and various lubes to no avail. then tapped one of these on applied bit of heat and 1/2 inch breaker bar with socket thought if it breaks it breaks, but it didnt, it took all my weight ( 15st) hanging off the breaker bar and eventually broke the bolt which made drilling easier. I was able to reuse it after aswell. Am now going to invest in another set incase I loose them.
Veröffentlichungsdatum: 2015-09-14
Rated 5 von 5 von aus Round manifold nuts Bought these whilst trying to remove my son's exhaust manifold on his car. We managed to nicely round off three nuts and spent a good hour and different methods trying to get them off. They were also well corroded. Went to Screwfix and got this set and had all three nuts off within five minutes. Just a tap onto the nut and some controlled pressure and they all cracked nicely. Half the price of the very similar Irwin set and no doubt vastly cheaper than a garage. For the price well worth the money even if they are seldom or never used again - plus the added satisfaction....
Veröffentlichungsdatum: 2016-07-19
Rated 5 von 5 von aus Wish I'd bought this years ago Half the price of the Irwin kit and good quality. Just used it to remove a rounded 14mm rear caliper bolt that was well rusted in. Took all my 18st weight to shift it but this gripped first time and held no problem. Brought back memories of all the struggles I've had with rounded bolts over the years, so wish I'd known of these before. You can use with a 3/8 socket drive or with a 22mm spanner if depth is limited.
Veröffentlichungsdatum: 2016-05-08
Rated 5 von 5 von aus Lifesaver Worked on a completely rounded 15mm m12 bolt which was seized into bottom leg of suspension strut. I'd even ground two sides of the bolt flat to get an open ended spanner on which failed. The 14mm one supplied (biggest in set) gripped in a way i couldnt fathom, used a 280 nm numatic torque wrench, that didnt even budge the bolt, then used it with a breaker bar and 4ft pole for leverage!! The bolt came loose and the bit worked wonders under a huge load!! A must for any toolkit.
Veröffentlichungsdatum: 2017-06-15
Rated 5 von 5 von aus Excellent tool! After struggling to remove a stubborn bolt at the back of the engine of my car (they are always at the back aren't they?) and removing the skin from my knuckles, I was ready to admit defeat when I came across these beauties from Erbauer. I had successfully rounded the bolt head and was all set to burn the car to the ground but I thought I would give it one more go. I tapped the remover gently over the head of the bolt and applied pressure to the ratchet arm..........and the bolt came undone immediately. It was as simple as that! I had tried everything that I could think of to get the bolt out, and this little remover did the job in seconds! I love this tool and can't wait for another stuck bolt to come my way! Bring it on!
Veröffentlichungsdatum: 2016-04-08
Rated 5 von 5 von aus An amazing tool I saw a professional mechanic friend using these, and decided to buy myself a set. They work amazingly well, they are like a set of female easy-outs.... They are designed to work on damaged or rusty nuts and bolts, but as I discovered they also work on Phillips screws which have had their cross damaged. This is very good news as you can remove self tapping screws which would be too hard to drill out... Buy a set today - I think they will be my 'tool of the yeat' and are helping me rebuild my Land Rover!
Veröffentlichungsdatum: 2015-04-27
  • y_2017, m_9, d_22, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_59
  • loc_de_DE, sid_1158K, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de