• Lieferbedingungen
  • Widerruf
  • Zahlarten
  • Trusted Shops
  • Top Shops

DeWalt HSS-G Extrem Metallbohrer DT5056 10.0x133x84 mm Artikelnummer: 41059

7,99 €
Der Spezialist zum Freihandbohren in dünnwandigen Materialien. Kreisrunde Bohrungen mit sauberen, nahezu gratfreien Lochrändern. Starten sofort beim Ansetzen - kein Ankörnen mehr notwendig. Bis zu 50 % erhöhte Bruchstabilität. EXTREME 2™-Zentrierspitze ermöglicht punktgenaues Anbohren ohne Verlaufen, speziell geschliffene Schulterschneiden fräsen exakte, kreisrunde Bohrungen mit sauberen Rändern. In Schaftrichtung konstant zunehmender Kerndurchmesser für höchste Bruchstabilität im Freihandeinsatz. Zum Bohren von Blech- und dünnwandigen Profilmaterialien (sowie Rohre ohne Vorkörnen), wo exakte und saubere Bohrungen erforderlich sind. Ebenfalls sehr gut geeignet zum Bohren von Holz und Kunststoffen.
-
Technische Daten
-
Zusätzliche Information
Lieferumfang
DeWALT HSS-G Extrem Metallbohrer DT5056 10.0x133x84 mm
7,99 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
DeWalt HSS-G Extrem Metallbohrer DT5056 10.0x133x84 mm wurde bewertet mit 4.3 von 5 von 30.
Rated 5 von 5 von aus What a difference After spending far too much time attempting to drill into stainless steel with inferior quality bits I popped out in my frustration to Screwfix to buy this. What a difference quality makes, no pilot holes needed and no breakages. It cut through the steel with little effort.
Veröffentlichungsdatum: 2017-05-15
Rated 5 von 5 von aus Best metal drill bit around Very well made, strong and everlasting. Gives accurate and fast clean cut. Excellent waste removal
Veröffentlichungsdatum: 2011-05-28
Rated 5 von 5 von aus A tough bit Used this to drill through various grades and thicknesses of steel in combination with my dewalt drill purchased here also. The bit still hasn't gone blunt even after all the abuse it has suffered. Highly recommended.
Veröffentlichungsdatum: 2014-10-02
Rated 5 von 5 von aus Great bit of kit Having spent over an hour trying to drill through the side of a van using a cobalt HSS drill bit, I gave up and went to buy this drill bit. This bit went through in seconds with a nice clean accurate hole.
Veröffentlichungsdatum: 2016-10-28
Rated 5 von 5 von aus Excellent quality bits About the only thing DeWalt produce that I would recommend are their drill bits ( yes I know most people seem to like them but I don't... just my preference) Good quality, accurate and long lasting, if a little over priced
Veröffentlichungsdatum: 2014-06-12
Rated 5 von 5 von aus DeWalt 10mm Extr 2 HSS Drill Needed to drill a broken/seized 10mm steel bolt (2inch long) out of my car's front hub. (New front hub would have been £100+) 1st thought was to find a local small machine shop to do it for me - but these don't seem to exist any more where I live Had tried and ruined half a dozen standard black cheap HSS drills, and managed to get in about 1/4 inch and wandered off-center at that. Bought 2 of these drills and what a difference - It took about 20 minutes going slowly, ( using an old B & D drill and even older drill stand) but hole drilled was clean edged and accurate and followed the line of the rusted-in bolt well. I only needed to use one of the drills, and this only shows a small amount of wear. This product definitely gets my vote
Veröffentlichungsdatum: 2013-06-07
Rated 5 von 5 von aus Top drill for metalwork Half a dozen holes drilled in mild stell angle in no time at all. Just used a bit of GT85 as a cutings lubricant.
Veröffentlichungsdatum: 2017-02-11
Rated 5 von 5 von aus Best drill range around These DeWalt Extreme drills are outstanding. There's no need for a centre punch, as the tip holds its position well on start up. They are typically at least twice as fast as conventional HSS bits and the whole team use them as their preferred choice. Worth every penny! Top Tip: We've found it better to slow the larger drills right down once the main part has started cutting, as they cut more efficiently, overheat less, and don't snatch once they break through. Otherwise they are so sharp that they can pull through suddenly.
Veröffentlichungsdatum: 2015-05-16
  • y_2017, m_10, d_16, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_de_DE, sid_41059, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de