• Lieferbedingungen
  • Widerruf
  • Zahlarten
  • Trusted Shops
  • Top Shops

DeWalt HSS-G Extra Metallbohrer 2 DT5052 8,0x117x72 mm Artikelnummer: 15959

5,49 €
Der Spezialist zum Freihandbohren in dünnwandigen Materialien. Kreisrunde Bohrungen mit sauberen, nahezu gratfreien Lochrändern. Starten sofort beim Ansetzen - kein Ankörnen mehr notwendig. Bis zu 50 % erhöhte Bruchstabilität. EXTREME 2™-Zentrierspitze ermöglicht punktgenaues Anbohren ohne Verlaufen, speziell geschliffene Schulterschneiden fräsen exakte, kreisrunde Bohrungen mit sauberen Rändern. In Schaftrichtung konstant zunehmender Kerndurchmesser für höchste Bruchstabilität im Freihandeinsatz. Zum Bohren von Blech- und dünnwandigen Profilmaterialien (sowie Rohre ohne Vorkörnen), wo exakte und saubere Bohrungen erforderlich sind. Ebenfalls sehr gut geeignet zum Bohren von Holz und Kunststoffen.
-
Technische Daten
-
Zusätzliche Information
Lieferumfang
DeWALT HSS-G Extra Metallbohrer 2 DT5052 8,0x117x72 mm
5,49 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)

oder

Markt wählen


Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

1
DeWalt HSS-G Extra Metallbohrer 2 DT5052 8,0x117x72 mm wurde bewertet mit 4.8 von 5 von 22.
Rated 5 von 5 von aus Great Bit This bit was better than expected. It is HSS ground and made in Germany unlike other bits I could mention. Used with cutting fluid these breezed through stainless steel 3mm. I have done 30 holes so far and still looks new. No wandering and cut immediately. I usually use Heller or Gurhing but needed to complete a job quickly. Excellent substitute will go for the 10mm and see how it performs.
Veröffentlichungsdatum: 2015-06-03
Rated 5 von 5 von aus Great drill bit Task: remove 1 very stuck cotter pin Step1: After no luck with hammering, pressing etc. had to resort to Step 2: Drill. After about 1 hour & 3 drill bits blunt\broken, retired to bed a frustrated man Step 3: Collected this bit next morning. 10 minutes after getting home job done. Really gave this bit a hard time, but its back in the tool box now & looks as fresh as new! So pleased with this bit I felt inspired to write a review & will be purchasing a set.
Veröffentlichungsdatum: 2015-10-07
Rated 5 von 5 von aus Only Drill Bit for Stainless Trying to drill stainless steel strip (5mm thick) which seems incredibly hard. Used 3mm to 8mm drills in cobalt and even hss tct (specifically for s/s) with dismal results even with low speed and plenty of cutting oil. No success with the conventional tipped extreme 2 at sizes less than 5mm but the 5mm and above with pilot and "flat" tip are completely different and worked superbly and cut easily. Didn't push drills, but drilled at slowest speed and with plenty of water spray to keep bit cool (top YouTube tip on drilling stainless) and stepped up in drills in increments to be on safe side. Cut a dozen holes to 10mm easily. Probably can push drills much harder next time!
Veröffentlichungsdatum: 2017-08-31
Rated 5 von 5 von aus Excellent drill I killed three different drill bits drilling holes in scaffold tubes. I read the other reviews on here and wanted to give it a try with this one. Brilliant - job done, drill bit still perfect. DeWalt drill bits for me all the way now.
Veröffentlichungsdatum: 2016-02-05
Rated 5 von 5 von aus Love these drill bits Due to the tip shape they center well and don't tend to drift when starting so the hole is exactly where you want it. They are fast to drill with but can leave untidy edges as the cut is quite aggressive.
Veröffentlichungsdatum: 2016-07-20
Rated 5 von 5 von aus Truly Awesome I have been drilling 7mm angle iron with 8mm holes Having bought some 'jobbing' drill bits and broken 3 on first 12 holes now bought some DeWalt Extreme. No comparison No pilot hole needed. Drilled a further 160 holes with two Extreme bits - no breakage - still sharp - could probably have got away with 1!!
Veröffentlichungsdatum: 2017-04-19
Rated 5 von 5 von aus These really work! I bought a set of these drills in smaller sizes by mistake and I am so glad I did. When I came back for larger 8mm & 10mm sizes I knew that I wanted this unusual centre tip design. Has drilled through various metal sheet and beams with accuracy and ease.
Veröffentlichungsdatum: 2015-11-10
Rated 5 von 5 von aus Great drill bit I used this to drill through 4mm mild steel angle iron, I drilled over 150 holes and it's still going strong. Need I say more.
Veröffentlichungsdatum: 2016-05-31
  • y_2017, m_9, d_22, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_de_DE, sid_15959, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de