• Lieferbedingungen
  • Widerruf
  • Zahlarten
  • Trusted Shops
  • Top Shops

DeWalt HSS-G Extra Metallbohrer DT5042 4.0x75x43 2 Stück Artikelnummer: 11805

4,29 €
Der Spezialist zum Freihandbohren in dünnwandigen Materialien. Kreisrunde Bohrungen mit sauberen, nahezu gratfreien Lochrändern. Starten sofort beim Ansetzen - kein Ankörnen mehr notwendig. Bis zu 50 % erhöhte Bruchstabilität. EXTREME 2™-Zentrierspitze ermöglicht punktgenaues Anbohren ohne Verlaufen, speziell geschliffene Schulterschneiden fräsen exakte, kreisrunde Bohrungen mit sauberen Rändern. In Schaftrichtung konstant zunehmender Kerndurchmesser für höchste Bruchstabilität im Freihandeinsatz. Zum Bohren von Blech- und dünnwandigen Profilmaterialien (sowie Rohre ohne Vorkörnen), wo exakte und saubere Bohrungen erforderlich sind. Ebenfalls sehr gut geeignet zum Bohren von Holz und Kunststoffen.
Technische Daten
Zusätzliche Information
DeWALT HSS-G Extra Metallbohrer DT5042 4.0x75x43 2 Stück
4,29 € Inkl. 19% MwSt., (zzgl. 4,95 € Versand)


Markt wählen

Zum Wunschzettel hinzufügen

* Ausnahmen beachten Details anzeigen

DeWalt HSS-G Extra Metallbohrer DT5042 4.0x75x43 2 Stück wurde bewertet mit 4.3 von 5 von 14.
Rated 5 von 5 von aus A revalation One HSS drill bit is the same as any other, right? Wrong - these exceeded my expectation and if you think I'm a bit sad to rave about a drill bit - then try one...."
Veröffentlichungsdatum: 2009-12-31
Rated 5 von 5 von aus Strong bit & good performance A very sharp and strong bit. Used it to drill out a seized steel bolt. It chewed through it no problem although by the end of it it did become blunt but this was expected. Other standard bits just blunted and glowed red after a millimetre or two. Given the price, I was happy with it and am considering replacing all my bits with this range.
Veröffentlichungsdatum: 2012-09-17
Rated 5 von 5 von aus Drill A good quality drill at a reasonable price -which so far has performed well
Veröffentlichungsdatum: 2012-06-18
Rated 1 von 5 von aus Blunt... I bought these to drill through my steel lintels for hanging blinds! After 6 holes of light pressure whilst drilling on a low speed the bit is blunt and now useless? Blunt after 6 holes isn't very good i feel, onto the 2nd bit and i still have 21 holes to drill, i don't think it's going to end well?
Veröffentlichungsdatum: 2017-07-26
Rated 5 von 5 von aus Really Pleased! Bought these for when we put our new metal shed roof on, having to drill into a seriously heay box section i didnt have faith in the self drilling tek screws so used a 4mm drill bit for a pilot hole, drilled through like a knife through hot butter, great stuff and still have life in them now
Veröffentlichungsdatum: 2016-03-04
Rated 1 von 5 von aus Disappointing Bought 2 packs of these drills, the first pack of 2 did an excellent job, but as they dulled we started the second pack. They wouldn't even look at the metal we were drilling and it was the same job!! How can 2 packs of drill bits be so different? Good job we didn't use the duff pack first.
Veröffentlichungsdatum: 2014-07-01
Rated 3 von 5 von aus Vicious! This drill bit is vicious. You dont push the drill into the wood, you hang onto it because it drives itself in. On the face of it this should be excellent but I found it kept falling out of the chuck as a result of me having to exert a pulling force on it as opposed to pushing it.
Veröffentlichungsdatum: 2012-06-12
Rated 5 von 5 von aus Great product I would highly recommend these drill bits. I had been trying to drill through some metal with cheap bits that kept snapping. I bought these and sailed through the metal with ease and without any bits getting snapped.
Veröffentlichungsdatum: 2015-11-26
  • y_2017, m_9, d_25, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_de_DE, sid_11805, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_screw-fix-de